Cast & Forged
Aluminum Forged Ring
Seamless rolled ring for pressure boundary and rotating parts.
Quote within 24 working hours · Certificate type stated on the quote
Wall 20 – 300 mm · Ø 200 – 4,000 mm · 2014 · 2024 · 5083 +4
Specification
Aluminum Forged Ring — Full Spec Range
These are the ranges we can quote against today. Anything outside them is a mill enquiry, not a stock call — we will say which in the first reply.
| Thickness | Wall 20 – 300 mm |
|---|---|
| Width | Ø 200 – 4,000 mm |
| Length | Height up to 800 mm |
| Alloy grades | 2014 · 2024 · 5083 · 6061 · 6082 · 7075 · 2219 |
| Tempers | O · H112 · T6 · T652 · T73 |
| Standards | ASTM B247 · AMS 4127 · GB/T 8545 |
| Surface finish | Rough machined · Solution treated |
| Typical applications | Flange · Gear blank · Pressure vessel · Aerospace ring · Bearing race |
What the mill checks
Four Numbers That Decide Whether This Ships
1 Gauge at nine points
Thickness is measured across the full width, not at one spot. A coil that is on gauge at the edge and 0.04 mm light at the center will still pass a lazy check.
2 Mechanical properties per heat
Tensile, yield and elongation pulled from the actual heat, not from a nominal table. On request the values are reported on a 3.1 certificate with the heat number; a 2.2 statement is available where that is all your file requires.
3 Surface under raking light
Roller marks, oil stain, scratch and edge burr are checked before packing. Coated product is checked for film build and color delta.
4 Packing for the voyage
Kraft plus PE film, steel-strapped pallet, edge protector, desiccant. Photos of the strapping and seal number sent before sailing.
Where it is used
Common End Uses for Aluminum Forged Ring
Marine & Shipbuilding
Mg-alloyed plate resists seawater and welds without losing strength. This is the series classification societies expect to see on hull plate.
Transport & Automotive
Weight reduction per body panel is the entire business case. Formability and weldability decide the grade.
Building & Curtain Wall
Facade work is a coating problem first and a metal problem second. PVDF film thickness and anodizing class are what the specifier checks.
Also compare
Related Categories
Aluminum Casting
Die casting, sand casting and low-pressure casting to drawing.
— · Per drawing
Aluminum Sheet & Plate
Rolled flat product from 0.2 mm foil stock to 200 mm plate.
0.2 – 200 mm · 600 – 2,200 mm
Aluminum Coil
Continuously cast or hot-rolled coil for roll forming and stamping.
0.2 – 8.0 mm · 600 – 2,200 mm
Before you ask
Aluminum Forged Ring — Questions That Come Up
Which alloy grades and tempers can you supply in Aluminum Forged Ring?
Grades: 2014 · 2024 · 5083 · 6061 · 6082 · 7075 · 2219. Tempers: O · H112 · T6 · T652 · T73. If your grade is not on that list it is usually a mill enquiry rather than a no — send it and we will say which one, in the first reply.
What sizes does Aluminum Forged Ring cover?
Wall 20 – 300 mm thick, Ø 200 – 4,000 mm wide, Height up to 800 mm. Quoted against ASTM B247 · AMS 4127 · GB/T 8545. Where a drawing names two standards, we confirm which one governs before the order, not after the inspection report.
What certificate comes with Aluminum Forged Ring?
EN 10204 3.1 with the heat analysis and mechanical results, or 2.2 where that is what your file requires. Third-party inspection by SGS or BV is available. The certificate type is confirmed on the quotation, before you commit.
What is the minimum order for Aluminum Forged Ring?
Castings and forged rings are quoted by piece, because tooling and die cost usually set the floor rather than weight.
How fast do you quote Aluminum Forged Ring?
Quotation within 24 hours on working days. We price grade, temper, gauge and quantity in one reply, and say which standard governs if the drawing names two.
Where does the Aluminum Forged Ring come from?
From audited mills across 6 regions — Gongyi, Wuxi / Changzhou, Zouping / Binzhou, Foshan, Ningbo / Taizhou, Luoyang — each chosen for the process this product needs. You deal with one party; the mill allocation is our job, not yours.
Quote on Aluminum Forged Ring
Send grade, temper, thickness and quantity. You get price, lead time, MOQ and certificate type in one reply.