Metal Products — 33 Categories
Four metal families — aluminum, stainless steel, carbon steel and copper alloys — from 0.006 mm foil to 300 mm plate, and from a stocked 1220 × 2440 sheet to a custom extrusion die. Every category below is a live supply line: open one for the full spec range, the standards it is made to, and the checks we run before it ships.
Flat Rolled
Click any card for the full spec table
1050 / 1060 / 1100
Aluminum Sheet & Plate
Rolled flat product from 0.2 mm foil stock to 200 mm plate.
- Thickness
- 0.2 – 200 mm
- Width / size
- 600 – 2,200 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5052 · 5083 · 5754 · 6061 · 6082 · 7075
- Standards
- ASTM B209 · EN 485 · GB/T 3880 · JIS H4000
1050 / 1060 / 1100
Aluminum Coil
Continuously cast or hot-rolled coil for roll forming and stamping.
- Thickness
- 0.2 – 8.0 mm
- Width / size
- 600 – 2,200 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 3004 · 3105 · 5052 · 5754 · 8011
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 1070
Aluminum Strip
Slit coil with controlled edge burr and camber.
- Thickness
- 0.1 – 3.0 mm
- Width / size
- 10 – 1,600 mm
- Main grades
- 1050 · 1060 · 1070 · 1100 · 3003 · 5052 · 8011
- Standards
- ASTM B209 · EN 485 · GB/T 8544
1235 / 8011 / 8079
Aluminum Foil
Household, container, pharmaceutical and capacitor foil.
- Thickness
- 0.006 – 0.2 mm
- Width / size
- 100 – 1,700 mm
- Main grades
- 1235 · 8011 · 8079 · 8021 · 1100 · 1060
- Standards
- ASTM B479 · EN 546 · GB/T 3198
1050 / 1060 / 1070
Aluminum Circle & Disc
Blanks for deep drawing into cookware and lamp shades.
- Thickness
- 0.3 – 6.0 mm
- Width / size
- Ø 100 – 1,200 mm
- Main grades
- 1050 · 1060 · 1070 · 1100 · 3003 · 5052
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 3003
Aluminum Tread / Checker Plate
Raised-pattern slip-resistant plate: five-bar, three-bar, diamond.
- Thickness
- 1.0 – 8.0 mm
- Width / size
- 600 – 2,000 mm
- Main grades
- 1050 · 1060 · 3003 · 5052 · 5754 · 6061
- Standards
- ASTM B209 · EN 1386 · GB/T 3618
Extruded & Drawn
Click any card for the full spec table
1060 / 3003 / 5052
Aluminum Tube & Pipe
Seamless extruded, cold-drawn, and welded tube.
- Thickness
- Wall 0.5 – 20 mm
- Width / size
- OD 6 – 400 mm
- Main grades
- 1060 · 3003 · 5052 · 5083 · 6061 · 6063 · 6082
- Standards
- ASTM B210 · ASTM B241 · EN 754 · GB/T 6893
1060 / 2011 / 2024
Aluminum Bar & Rod
Round, square, hexagonal and flat bar; rolled or extruded.
- Width / size
- Ø 5 – 400 mm
- Main grades
- 1060 · 2011 · 2024 · 3003 · 5052 · 6061 · 6063 · 6082 · 7075
- Standards
- ASTM B211 · ASTM B221 · EN 754 · GB/T 3191
1050 / 1060 / 1100
Aluminum Wire
Drawn wire for welding, cable conductor and mesh.
- Width / size
- Ø 0.5 – 12 mm
- Main grades
- 1050 · 1060 · 1100 · 4043 · 5356 · 6061
- Standards
- AWS A5.10 · ASTM B211 · GB/T 3195
6063 / 6061 / 6005
Aluminum Extrusion Profile
Custom die extrusions — the section is drawn, not bought.
- Thickness
- Wall 0.8 – 20 mm
- Width / size
- Circumscribed Ø up to 400 mm
- Main grades
- 6063 · 6061 · 6005 · 6060 · 6082 · 6463
- Standards
- EN 755 · EN 12020 · ASTM B221 · GB/T 5237
Finished
Click any card for the full spec table
1050 / 1060 / 1100
Color Coated Aluminum
Coil or sheet pre-painted with PVDF, PE or epoxy.
- Thickness
- 0.2 – 4.0 mm
- Width / size
- 600 – 1,800 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 3004 · 3105 · 5052
- Standards
- AAMA 2605 · EN 1396 · GB/T 23443
Skin: 1100 / 3003 / 5005
Aluminum Composite Panel
Two aluminum skins bonded to a mineral or PE core.
- Thickness
- Panel 3 / 4 / 5 / 6 mm
- Width / size
- 1,000 – 1,575 mm
- Main grades
- Skin: 1100 · 3003 · 5005
- Standards
- ASTM E84 · EN 13501-1 · GB/T 17748
1050 / 1060 / 1100
Embossed Aluminum
Stucco, orange-peel and diamond embossed coil and sheet.
- Thickness
- 0.2 – 3.0 mm
- Width / size
- 600 – 1,600 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5052
- Standards
- ASTM B209 · EN 485
1050 / 1060 / 1100
Anodized Aluminum
Electrochemical oxide layer — Color is in the metal, not on it.
- Thickness
- 0.3 – 8.0 mm
- Width / size
- 600 – 1,600 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5005 · 6063
- Standards
- ISO 7599 · AAMA 611 · GB/T 5237.2
1050 / 1060 / 3003
Corrugated Aluminum Sheet
Roll-formed roofing and cladding profiles.
- Thickness
- 0.3 – 1.2 mm
- Width / size
- Cover width 750 – 1,000 mm
- Main grades
- 1050 · 1060 · 3003 · 3004 · 3105 · 5052
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 1070
Mirror Finish Aluminum Sheet
Polished to a specular reflectance above 85%.
- Thickness
- 0.2 – 3.0 mm
- Width / size
- 600 – 1,300 mm
- Main grades
- 1050 · 1060 · 1070 · 1085 · 1100 · 5005
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 1100
Perforated Aluminum Sheet
Punched round, slot or decorative hole patterns.
- Thickness
- 0.3 – 5.0 mm
- Width / size
- 600 – 1,500 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5052
- Standards
- ASTM B209 · EN 485
Cast & Forged
Click any card for the full spec table
A356 / A380 / ADC12
Aluminum Casting
Die casting, sand casting and low-pressure casting to drawing.
- Width / size
- Per drawing
- Main grades
- A356 · A380 · ADC12 · ZL101 · ZL102 · ZL104
- Standards
- ASTM B26 · ASTM B85 · GB/T 9438
2014 / 2024 / 5083
Aluminum Forged Ring
Seamless rolled ring for pressure boundary and rotating parts.
- Thickness
- Wall 20 – 300 mm
- Width / size
- Ø 200 – 4,000 mm
- Main grades
- 2014 · 2024 · 5083 · 6061 · 6082 · 7075 · 2219
- Standards
- ASTM B247 · AMS 4127 · GB/T 8545
Stainless Steel
Click any card for the full spec table
201 / 304 / 304L
Stainless Steel Coil
Cold-rolled and hot-rolled coil in 200 / 300 / 400 series.
- Thickness
- 0.3 – 8.0 mm
- Width / size
- 600 – 2,000 mm
- Main grades
- 201 · 304 · 304L · 316L · 430
- Standards
- ASTM A240 · JIS G4305 · EN 10088
201 / 304 / 304L
Stainless Steel Sheet & Plate
Cold-rolled sheet and hot-rolled plate for structural and decorative use.
- Thickness
- 0.3 – 120 mm
- Width / size
- 1,000 – 2,000 mm
- Main grades
- 201 · 304 · 304L · 316 · 316L · 321 · 430 · 2205
- Standards
- ASTM A240 · JIS G4305 · EN 10088-2
304 / 304L / 316L
Stainless Steel Tube & Pipe
Seamless and welded round, square and rectangular tube.
- Thickness
- Wall 0.5 – 40 mm
- Width / size
- OD 6 – 630 mm
- Main grades
- 304 · 304L · 316L · 321 · 310S · 2205
- Standards
- ASTM A312 · A213 · A269 · EN 10216
304 / 304L / 316
Stainless Steel Bar & Rod
Round, flat, square and hexagonal bar, cold drawn or hot rolled.
- Thickness
- Ø 3 – 600 mm
- Main grades
- 304 · 304L · 316 · 316L · 303 · 410 · 420 · 430 · 2205 · 904L
- Standards
- ASTM A276 · A479 · EN 10088-3
304 / 304L / 316L
Stainless Steel Profile
Angle, channel, I-beam and special sections.
- Thickness
- Section 20 – 200 mm
- Main grades
- 304 · 304L · 316L
- Standards
- ASTM A276 · GB/T 1220
304 / 304L / 316
Stainless Steel Fittings & Flanges
Elbows, tees, reducers, flanges, fasteners and custom fabricated parts.
- Thickness
- DN 15 – DN 600
- Main grades
- 304 · 304L · 316 · 316L
- Standards
- ASTM A403 · A182 · ANSI / ASME B16.9
Carbon Steel
Click any card for the full spec table
Q235 / Q345 / Q355
Carbon Steel Plate
Hot-rolled and cold-rolled plate in Q235 / Q345 / Q355.
- Thickness
- 1.0 – 300 mm
- Width / size
- 1,250 – 2,500 mm
- Main grades
- Q235 · Q345 · Q355 · SS400 · A36
- Standards
- GB/T 700 · GB/T 1591 · ASTM A36 · JIS G3101
Q195 / Q235 / SPCC
Carbon Steel Coil
Hot-rolled and cold-rolled coil for roll forming and stamping.
- Thickness
- 0.3 – 16 mm
- Width / size
- 600 – 2,000 mm
- Main grades
- Q195 · Q235 · SPCC · DC01 · SS400
- Standards
- GB/T 912 · GB/T 2518 · JIS G3141
Q195 / Q235 / Q345
Carbon Steel Tube & Pipe
Welded and seamless round, square and rectangular tube.
- Thickness
- Wall 1.0 – 40 mm
- Width / size
- OD 15 – 630 mm
- Main grades
- Q195 · Q235 · Q345 · 20# · 45#
- Standards
- GB/T 3091 · GB/T 8162 · ASTM A53
Q235 / Q345 / Q355
Carbon Steel Section
Angle, channel, I-beam, H-beam and flat bar.
- Thickness
- Section 20 – 400 mm
- Main grades
- Q235 · Q345 · Q355 · SS400
- Standards
- GB/T 706 · GB/T 9787 · JIS G3192
Copper Alloys
Click any card for the full spec table
C11000 / C10100 / C10200 (T1
Copper Sheet & Strip
Pure copper sheet, strip and foil for conductivity and forming.
- Thickness
- 0.05 – 30 mm
- Width / size
- 10 – 1,200 mm
- Main grades
- C11000 · C10100 · C10200 (T1 · T2 · T3)
- Standards
- ASTM B152 · GB/T 2040 · JIS H3100
C260 / C270 / C360 (H62
Brass Bar & Rod
Brass round, flat, square and hex bar for machining and decoration.
- Thickness
- Ø 2 – 300 mm
- Main grades
- C260 · C270 · C360 (H62 · H65 · H59)
- Standards
- ASTM B16 · GB/T 4423 · JIS H3250
C51000 / C52100 / C61400
Bronze Alloys
Tin bronze, aluminum bronze and phosphor bronze in bar, sheet and wire.
- Thickness
- Ø 2 – 200 mm
- Main grades
- C51000 · C52100 · C61400 · C63000
- Standards
- ASTM B139 · B150 · GB/T 4423
C17200 / C71500 / C18150 (CuCrZr)
Special Copper Alloys
Beryllium copper, cupronickel and chromium zirconium copper.
- Thickness
- Ø 1 – 200 mm
- Main grades
- C17200 · C71500 · C18150 (CuCrZr)
- Standards
- ASTM B194 · B151 · B747
How to specify
Four Things to Send With Your Enquiry
1 Material and grade
"5052-H32 aluminum" or "316L stainless" — not just "metal sheet". If you are unsure, tell us the end use and we will propose a grade.
2 Dimensions
Thickness × width × length, or coil ID and weight. State the tolerance you need, not just the number.
3 Quantity and destination
Tonnage or piece count, plus discharge port. This decides whether we quote stock, mill production or consolidation.
4 Certificate requirement
EN 10204 3.1 is our default. If your project needs a classification society or an aerospace report, say it now — it changes the mill.