Carbon Steel
Carbon Steel Plate
Hot-rolled and cold-rolled plate in Q235 / Q345 / Q355.
Quote within 24 working hours · Certificate type stated on the quote
1.0 – 300 mm · 1,250 – 2,500 mm · Q235 · Q345 · Q355 +2
Specification
Carbon Steel Plate — Full Spec Range
These are the ranges we can quote against today. Anything outside them is a mill enquiry, not a stock call — we will say which in the first reply.
| Thickness | 1.0 – 300 mm |
|---|---|
| Width | 1,250 – 2,500 mm |
| Length | Up to 12,000 mm |
| Alloy grades | Q235 · Q345 · Q355 · SS400 · A36 |
| Tempers | Hot rolled · Cold rolled |
| Standards | GB/T 700 · GB/T 1591 · ASTM A36 · JIS G3101 |
| Surface finish | Mill finish · Pickled · Oiled |
| Typical applications | Structure · Machinery · Shipbuilding · Pressure vessel |
What the mill checks
Four Numbers That Decide Whether This Ships
1 Gauge at nine points
Thickness is measured across the full width, not at one spot. A coil that is on gauge at the edge and 0.04 mm light at the center will still pass a lazy check.
2 Mechanical properties per heat
Tensile, yield and elongation pulled from the actual heat, not from a nominal table. On request the values are reported on a 3.1 certificate with the heat number; a 2.2 statement is available where that is all your file requires.
3 Surface under raking light
Roller marks, oil stain, scratch and edge burr are checked before packing. Coated product is checked for film build and color delta.
4 Packing for the voyage
Kraft plus PE film, steel-strapped pallet, edge protector, desiccant. Photos of the strapping and seal number sent before sailing.
Also compare
Related Categories
Carbon Steel Coil
Hot-rolled and cold-rolled coil for roll forming and stamping.
0.3 – 16 mm · 600 – 2,000 mm
Carbon Steel Tube & Pipe
Welded and seamless round, square and rectangular tube.
Wall 1.0 – 40 mm · OD 15 – 630 mm
Carbon Steel Section
Angle, channel, I-beam, H-beam and flat bar.
Section 20 – 400 mm · —
Before you ask
Carbon Steel Plate — Questions That Come Up
Which alloy grades and tempers can you supply in Carbon Steel Plate?
Grades: Q235 · Q345 · Q355 · SS400 · A36. Tempers: Hot rolled · Cold rolled. If your grade is not on that list it is usually a mill enquiry rather than a no — send it and we will say which one, in the first reply.
What sizes does Carbon Steel Plate cover?
1.0 – 300 mm thick, 1,250 – 2,500 mm wide, Up to 12,000 mm. Quoted against GB/T 700 · GB/T 1591 · ASTM A36 · JIS G3101. Where a drawing names two standards, we confirm which one governs before the order, not after the inspection report.
What certificate comes with Carbon Steel Plate?
EN 10204 3.1 with the heat analysis and mechanical results, or 2.2 where that is what your file requires. Third-party inspection by SGS or BV is available. The certificate type is confirmed on the quotation, before you commit.
What is the minimum order for Carbon Steel Plate?
2 t for stocked flat-rolled. Below that we consolidate into a shared container, so the order still ships — it just waits for a sailing.
How fast do you quote Carbon Steel Plate?
Quotation within 24 hours on working days. We price grade, temper, gauge and quantity in one reply, and say which standard governs if the drawing names two.
Where does the Carbon Steel Plate come from?
From audited mills across 6 regions — Gongyi, Wuxi / Changzhou, Zouping / Binzhou, Foshan, Ningbo / Taizhou, Luoyang — each chosen for the process this product needs. You deal with one party; the mill allocation is our job, not yours.
Quote on Carbon Steel Plate
Send grade, temper, thickness and quantity. You get price, lead time, MOQ and certificate type in one reply.