Extruded & Drawn
Aluminum Tube & Pipe
Seamless extruded, cold-drawn, and welded tube.
Quote within 24 working hours · Certificate type stated on the quote
Wall 0.5 – 20 mm · OD 6 – 400 mm · 1060 · 3003 · 5052 +4
Specification
Aluminum Tube & Pipe — Full Spec Range
These are the ranges we can quote against today. Anything outside them is a mill enquiry, not a stock call — we will say which in the first reply.
| Thickness | Wall 0.5 – 20 mm |
|---|---|
| Width | OD 6 – 400 mm |
| Length | Up to 6,000 mm (or fixed cut) |
| Alloy grades | 1060 · 3003 · 5052 · 5083 · 6061 · 6063 · 6082 |
| Tempers | O · H14 · T4 · T5 · T6 |
| Standards | ASTM B210 · ASTM B241 · EN 754 · GB/T 6893 |
| Surface finish | Mill finish · anodized · Powder coated |
| Typical applications | Heat exchanger · Pneumatic line · Furniture · Irrigation · Structural |
What the mill checks
Four Numbers That Decide Whether This Ships
1 Gauge at nine points
Thickness is measured across the full width, not at one spot. A coil that is on gauge at the edge and 0.04 mm light at the center will still pass a lazy check.
2 Mechanical properties per heat
Tensile, yield and elongation pulled from the actual heat, not from a nominal table. On request the values are reported on a 3.1 certificate with the heat number; a 2.2 statement is available where that is all your file requires.
3 Surface under raking light
Roller marks, oil stain, scratch and edge burr are checked before packing. Coated product is checked for film build and color delta.
4 Packing for the voyage
Kraft plus PE film, steel-strapped pallet, edge protector, desiccant. Photos of the strapping and seal number sent before sailing.
Where it is used
Common End Uses for Aluminum Tube & Pipe
Marine & Shipbuilding
Mg-alloyed plate resists seawater and welds without losing strength. This is the series classification societies expect to see on hull plate.
Transport & Automotive
Weight reduction per body panel is the entire business case. Formability and weldability decide the grade.
Building & Curtain Wall
Facade work is a coating problem first and a metal problem second. PVDF film thickness and anodizing class are what the specifier checks.
Also compare
Related Categories
Aluminum Bar & Rod
Round, square, hexagonal and flat bar; rolled or extruded.
— · Ø 5 – 400 mm
Aluminum Wire
Drawn wire for welding, cable conductor and mesh.
— · Ø 0.5 – 12 mm
Aluminum Extrusion Profile
Custom die extrusions — the section is drawn, not bought.
Wall 0.8 – 20 mm · Circumscribed Ø up to 400 mm
Before you ask
Aluminum Tube & Pipe — Questions That Come Up
Which alloy grades and tempers can you supply in Aluminum Tube & Pipe?
Grades: 1060 · 3003 · 5052 · 5083 · 6061 · 6063 · 6082. Tempers: O · H14 · T4 · T5 · T6. If your grade is not on that list it is usually a mill enquiry rather than a no — send it and we will say which one, in the first reply.
What sizes does Aluminum Tube & Pipe cover?
Wall 0.5 – 20 mm thick, OD 6 – 400 mm wide, Up to 6,000 mm (or fixed cut). Quoted against ASTM B210 · ASTM B241 · EN 754 · GB/T 6893. Where a drawing names two standards, we confirm which one governs before the order, not after the inspection report.
What certificate comes with Aluminum Tube & Pipe?
EN 10204 3.1 with the heat analysis and mechanical results, or 2.2 where that is what your file requires. Third-party inspection by SGS or BV is available. The certificate type is confirmed on the quotation, before you commit.
What is the minimum order for Aluminum Tube & Pipe?
500 kg per extrusion die; tube, bar and wire quote from 1 t. Below the minimum we consolidate with other lines rather than refuse the order.
How fast do you quote Aluminum Tube & Pipe?
Quotation within 24 hours on working days. We price grade, temper, gauge and quantity in one reply, and say which standard governs if the drawing names two.
Where does the Aluminum Tube & Pipe come from?
From audited mills across 6 regions — Gongyi, Wuxi / Changzhou, Zouping / Binzhou, Foshan, Ningbo / Taizhou, Luoyang — each chosen for the process this product needs. You deal with one party; the mill allocation is our job, not yours.
Quote on Aluminum Tube & Pipe
Send grade, temper, thickness and quantity. You get price, lead time, MOQ and certificate type in one reply.