Finished
Aluminum Composite Panel
Two aluminum skins bonded to a mineral or PE core.
Quote within 24 working hours · Certificate type stated on the quote
Panel 3 / 4 / 5 / 6 mm · 1,000 – 1,575 mm · Skin: 1100 · 3003 · 5005 +0
Specification
Aluminum Composite Panel — Full Spec Range
These are the ranges we can quote against today. Anything outside them is a mill enquiry, not a stock call — we will say which in the first reply.
| Thickness | Panel 3 / 4 / 5 / 6 mm |
|---|---|
| Width | 1,000 – 1,575 mm |
| Length | Up to 6,000 mm |
| Alloy grades | Skin: 1100 · 3003 · 5005 |
| Tempers | H14 · H16 · H24 |
| Standards | ASTM E84 · EN 13501-1 · GB/T 17748 |
| Surface finish | PVDF · PE · Nano self-cleaning · Brushed · Mirror |
| Typical applications | Curtain wall cladding · Signage board · Facade renovation · Column wrap |
What the mill checks
Four Numbers That Decide Whether This Ships
1 Gauge at nine points
Thickness is measured across the full width, not at one spot. A coil that is on gauge at the edge and 0.04 mm light at the center will still pass a lazy check.
2 Mechanical properties per heat
Tensile, yield and elongation pulled from the actual heat, not from a nominal table. On request the values are reported on a 3.1 certificate with the heat number; a 2.2 statement is available where that is all your file requires.
3 Surface under raking light
Roller marks, oil stain, scratch and edge burr are checked before packing. Coated product is checked for film build and color delta.
4 Packing for the voyage
Kraft plus PE film, steel-strapped pallet, edge protector, desiccant. Photos of the strapping and seal number sent before sailing.
Where it is used
Common End Uses for Aluminum Composite Panel
Building & Curtain Wall
Facade work is a coating problem first and a metal problem second. PVDF film thickness and anodizing class are what the specifier checks.
Cookware & Deep Drawing
Deep drawing is a ductility test. Purity and O-temper control decide whether the blank draws or tears.
Also compare
Related Categories
Embossed Aluminum
Stucco, orange-peel and diamond embossed coil and sheet.
0.2 – 3.0 mm · 600 – 1,600 mm
Anodized Aluminum
Electrochemical oxide layer — Color is in the metal, not on it.
0.3 – 8.0 mm · 600 – 1,600 mm
Corrugated Aluminum Sheet
Roll-formed roofing and cladding profiles.
0.3 – 1.2 mm · Cover width 750 – 1,000 mm
Before you ask
Aluminum Composite Panel — Questions That Come Up
Which alloy grades and tempers can you supply in Aluminum Composite Panel?
Grades: Skin: 1100 · 3003 · 5005. Tempers: H14 · H16 · H24. If your grade is not on that list it is usually a mill enquiry rather than a no — send it and we will say which one, in the first reply.
What sizes does Aluminum Composite Panel cover?
Panel 3 / 4 / 5 / 6 mm thick, 1,000 – 1,575 mm wide, Up to 6,000 mm. Quoted against ASTM E84 · EN 13501-1 · GB/T 17748. Where a drawing names two standards, we confirm which one governs before the order, not after the inspection report.
What certificate comes with Aluminum Composite Panel?
EN 10204 3.1 with the heat analysis and mechanical results, or 2.2 where that is what your file requires. Third-party inspection by SGS or BV is available. The certificate type is confirmed on the quotation, before you commit.
What is the minimum order for Aluminum Composite Panel?
It follows the base material — 2 t for stocked flat-rolled — plus the finishing run, which we price alongside it rather than as a separate order.
How fast do you quote Aluminum Composite Panel?
Quotation within 24 hours on working days. We price grade, temper, gauge and quantity in one reply, and say which standard governs if the drawing names two.
Where does the Aluminum Composite Panel come from?
From audited mills across 6 regions — Gongyi, Wuxi / Changzhou, Zouping / Binzhou, Foshan, Ningbo / Taizhou, Luoyang — each chosen for the process this product needs. You deal with one party; the mill allocation is our job, not yours.
Quote on Aluminum Composite Panel
Send grade, temper, thickness and quantity. You get price, lead time, MOQ and certificate type in one reply.