Finished
Color Coated Aluminum
Coil or sheet pre-painted with PVDF, PE or epoxy.
Quote within 24 working hours · Certificate type stated on the quote
0.2 – 4.0 mm · 600 – 1,800 mm · 1050 · 1060 · 1100 +4
Specification
Color Coated Aluminum — Full Spec Range
These are the ranges we can quote against today. Anything outside them is a mill enquiry, not a stock call — we will say which in the first reply.
| Thickness | 0.2 – 4.0 mm |
|---|---|
| Width | 600 – 1,800 mm |
| Length | Coil or cut-to-length |
| Alloy grades | 1050 · 1060 · 1100 · 3003 · 3004 · 3105 · 5052 |
| Tempers | H14 · H16 · H24 · H26 · H44 |
| Standards | AAMA 2605 · EN 1396 · GB/T 23443 |
| Surface finish | PVDF (70% resin) · PE · Epoxy · Wood grain · Stone grain |
| Typical applications | Curtain wall · Roofing · Composite panel skin · Gutter · Ceiling |
What the mill checks
Four Numbers That Decide Whether This Ships
1 Gauge at nine points
Thickness is measured across the full width, not at one spot. A coil that is on gauge at the edge and 0.04 mm light at the center will still pass a lazy check.
2 Mechanical properties per heat
Tensile, yield and elongation pulled from the actual heat, not from a nominal table. On request the values are reported on a 3.1 certificate with the heat number; a 2.2 statement is available where that is all your file requires.
3 Surface under raking light
Roller marks, oil stain, scratch and edge burr are checked before packing. Coated product is checked for film build and color delta.
4 Packing for the voyage
Kraft plus PE film, steel-strapped pallet, edge protector, desiccant. Photos of the strapping and seal number sent before sailing.
Where it is used
Common End Uses for Color Coated Aluminum
Transport & Automotive
Weight reduction per body panel is the entire business case. Formability and weldability decide the grade.
Building & Curtain Wall
Facade work is a coating problem first and a metal problem second. PVDF film thickness and anodizing class are what the specifier checks.
Cookware & Deep Drawing
Deep drawing is a ductility test. Purity and O-temper control decide whether the blank draws or tears.
Also compare
Related Categories
Aluminum Composite Panel
Two aluminum skins bonded to a mineral or PE core.
Panel 3 / 4 / 5 / 6 mm · 1,000 – 1,575 mm
Embossed Aluminum
Stucco, orange-peel and diamond embossed coil and sheet.
0.2 – 3.0 mm · 600 – 1,600 mm
Anodized Aluminum
Electrochemical oxide layer — Color is in the metal, not on it.
0.3 – 8.0 mm · 600 – 1,600 mm
Before you ask
Color Coated Aluminum — Questions That Come Up
Which alloy grades and tempers can you supply in Color Coated Aluminum?
Grades: 1050 · 1060 · 1100 · 3003 · 3004 · 3105 · 5052. Tempers: H14 · H16 · H24 · H26 · H44. If your grade is not on that list it is usually a mill enquiry rather than a no — send it and we will say which one, in the first reply.
What sizes does Color Coated Aluminum cover?
0.2 – 4.0 mm thick, 600 – 1,800 mm wide, Coil or cut-to-length. Quoted against AAMA 2605 · EN 1396 · GB/T 23443. Where a drawing names two standards, we confirm which one governs before the order, not after the inspection report.
What certificate comes with Color Coated Aluminum?
EN 10204 3.1 with the heat analysis and mechanical results, or 2.2 where that is what your file requires. Third-party inspection by SGS or BV is available. The certificate type is confirmed on the quotation, before you commit.
What is the minimum order for Color Coated Aluminum?
It follows the base material — 2 t for stocked flat-rolled — plus the finishing run, which we price alongside it rather than as a separate order.
How fast do you quote Color Coated Aluminum?
Quotation within 24 hours on working days. We price grade, temper, gauge and quantity in one reply, and say which standard governs if the drawing names two.
Where does the Color Coated Aluminum come from?
From audited mills across 6 regions — Gongyi, Wuxi / Changzhou, Zouping / Binzhou, Foshan, Ningbo / Taizhou, Luoyang — each chosen for the process this product needs. You deal with one party; the mill allocation is our job, not yours.
Quote on Color Coated Aluminum
Send grade, temper, thickness and quantity. You get price, lead time, MOQ and certificate type in one reply.